Reservoirs are used to store and feed bulk fluids. Dispensing reservoirs are either top ported for viscosities less than 35,000cps or bottom ported up to 300,000cps. Versions are available in open top or bottle top. Open top reservoirs can accept liners for materials that need to avoid metal contact. Fluid reservoirs are either aluminum or stainless steel.
Model Type Max Working Pressure (psi/bar) Capacity (Litres) Weight (kg) Body Inner Diameter (mm) Body Outer Diameter (mm) Overall Height (mm) Overall Width (mm) Height without Lid (mm) FT1 Small Pressure 100/6.9 1 2 100 106 225 182 150 FT1-AG Pneumatic...
Features: Designed for long lasting use. Equipped with a quick and easy screw on cap, the CR300 can be attached directly to a Fisnar air-powered dispenser, allowing cartridges to be used for timed and manual potting and beading dispensing. Can...
A simple hand pump for a 5 gallon straight walled pail, suitable for dispensing grease, paste, RTV and silicone dispensing. The manual pail pump can be used for barrel, syringe, or larger cartridge filling, which then can be used for automatic dispensing.
An efficient method of transferring greases, epoxies, silicones, solder pastes and other thixotropic materials into a disposable barrel. The barrel loaders can be connected to a DSP501N dispenser for automatic operation or to shop air for manual control.
A see through pressure chamber that accepts 1 lb jars of volatile adhesives, solvents and hazardous substances such as cyanoacrylate. The chamber is also available in acrylic, but the glass model is recommended for volatile fluids dispensing. The PP300-A can be used in manual dispensing using a pinch tube pen or part of an automated dispensing system.
These electric pumps are ideal for dispensing from pre-exising cans or pails. With varying sizes from 1qt. to 5 gallons nearly all standard can & pail sizes will fit. Fluidsure™ electric pump packages include follower-plates and air-rams to assist the flow of material into the pump Inlet.
The Fisnar line of High Pressure fluid hoses are ideal fro all pump dispensing. With a PTFE Teflon® (Dupont T-62) Moisture Lock the hoses are non-contaiminating and easy to clean. They are rated for high to low pressure and will not have any deterioration over time. A smooth liner prevents entrapment issues and build-up of deposits.
A powerful medium ratio system for controlled fluid transfer from 1/10 gallon (310ml) plastic cartridges. Suitable for silicone type fluids. The system integrates a low-pulse pump design that can be used with a manual hand valve or connected to an automatic production robot for controlled dispensing applications.